Kyocera FS FS-1300D User Manual

6-4 Option
Installing the Memory Module
1 Turn off the printer and disconnect the power cord and printer cable.
2 Remove the right cover with a piece of metal similar to coin.
3 Remove the fixing tape in case of the first installation. Then, remove
the memory slot cover as shown in the figure.
4 Push out the clamps on both ends of the memory socket.
5 Remove the memory module from its package.
6 Aligning the cutouts of the memory module with the matching keys of
the socket, carefully plug the memory module into the memory
socket until it clicks in place.

Kyocera FS FS-1300D Specifications

General

Print Technology	Laser
Resolution	1200 x 1200 dpi
Connectivity	USB 2.0
Warm-up Time	15 seconds
Time to First Page	6 seconds
Output Capacity	250 sheets
Processor Frequency	360 MHz
First Print Out Time	6 seconds
Dimensions	375 x 393 x 250 mm
Weight	10.5 kg
Print Speed	28 ppm
Paper Capacity	250 sheets
Memory	32 MB
Supported Operating Systems	Windows, Mac, Linux