Kyocera FS FS-1300D User Manual

3-16 Connecting and Printing
Printer Tab
The Printer tab allows you to set print processing parameters that are not
available in the KX driver. As well as the form feed timeout, you can
change the memory size used for processing raster data such as bitmap
and JPEG files.
Connection Tab
You can use the Connection tab to set the emulation. You can also use
this tab to change the buffer memory size and buffer mode of the printer
for communication processing to the host.
Data Tab
The Data tab fetches and lists the data stored in the CF card or RAM
disk. Select a data type and click [View] to fetch and display a list of the
target data from the printer. The information displayed includes the
name, type and storage location.

Kyocera FS FS-1300D Specifications

General

Print Technology	Laser
Resolution	1200 x 1200 dpi
Connectivity	USB 2.0
Warm-up Time	15 seconds
Time to First Page	6 seconds
Output Capacity	250 sheets
Processor Frequency	360 MHz
First Print Out Time	6 seconds
Dimensions	375 x 393 x 250 mm
Weight	10.5 kg
Print Speed	28 ppm
Paper Capacity	250 sheets
Memory	32 MB
Supported Operating Systems	Windows, Mac, Linux