Kyocera FS FS-1300D User Manual

5-12 Troubleshooting
Duplexer
Paper is jammed in the duplex section. Remove the jammed paper using
the procedure given below.
1 Pull the paper cassette all the way out of the printer.
2 Open the duplexer's cover in front of the printer and remove any
jammed paper.
Open the duplexer's cover at the rear of the printer and remove any
jammed paper.
3 Push the cassette back in securely, and open and close the top
cover to clear the error. The printer warms up and resumes printing.

Kyocera FS FS-1300D Specifications

General

Print Technology	Laser
Resolution	1200 x 1200 dpi
Connectivity	USB 2.0
Warm-up Time	15 seconds
Time to First Page	6 seconds
Output Capacity	250 sheets
Processor Frequency	360 MHz
First Print Out Time	6 seconds
Dimensions	375 x 393 x 250 mm
Weight	10.5 kg
Print Speed	28 ppm
Paper Capacity	250 sheets
Memory	32 MB
Supported Operating Systems	Windows, Mac, Linux