iTag
Specification/Setup/Operation
Copyright © 2005~2007 Kyocera Mita America, Inc Version 8.0
There are additional settings required for the index fields depending on the information type. These additional
settings are detailed in the following subsections.
•
String – Alphanumeric string can be entered into the index field.
•
String List – Provides the operator with a pre-determined list to select for the index field.
• Numerical Value – Numeric string can be entered into the index field.
•
Currency – Monetary string can be entered into the index field.
•
Date and Time – Date and Time string can be entered into the index field.
String Information Type
Setting the information type to string will prompt the operator to input an alphanumeric string from the
panel. Select a string type when there are numerous possibilities for the input data, since this type is the most
generic of all field types.
The following settings should be set in the wizard when selecting the string index field type.
• Maximum number of characters. Set the maximum number (1 - 255) of characters the user is
allowed to input for the field. When this field is set, any character exceeding this value will be
rejected from both the MFP and SharePoint Services.
• Default Value. The default data that appears for this field. When this optional setting is provided, the
data appears on the field's input box instead of blank. This allows for faster input since the operator
can simply press enter or do some editing to enter the desired data for this field.
All Rights Reserved. Page 16
To Next Page
Loading...
Need help?
General
