iTag
Specification/Setup/Operation
Copyright © 2005~2007 Kyocera Mita America, Inc Version 8.0
Scan To E-Mail Import and Export
As with the PC List we can do the same for E-Mail Addresses.
To configure Scan To PC open Device Manager by Clicking the Start Button - > Kyocera -> Device Manager
-> KYOcapture Device Manager.
1. Highlight the desired device, in the example below I highlighted the LAB-KM5035. Select the Device
Tables Tab and then the Common Book Tab.
2. From the Common Book Tab Click the Export Button.
All Rights Reserved. Page 92
To Next Page
Loading...
Need help?
General
