iTag
Specification/Setup/Operation
Copyright © 2005~2007 Kyocera Mita America, Inc Version 8.0
If the Launch the KYOcapture Service has been selected the KYOcapture service will run the associated
iTag configuration file created with the iTag Configuration Utility. To view the KYOcapture service status,
mouse click on the Start > All Programs > Kyocera >KYOcapture Service Manager from the menu. The
KYOcapture Service Manager will display the following screen:
If the Launch KYOcapture Process Designer has been selected, the following screen will be displayed, and
the associated iTag configuration file can be displayed by browsing to the following default location:
C:\Program Files\Kyocera\iTag\iTag Configuration. The KYOcapture Process Designer can be launched at
anytime from the Start>All Programs>Kyocera>KYOcapture>Process Designer menu (see page 29 for
more detailed information).
All Rights Reserved. Page 26
To Next Page
Loading...
Need help?
General
