Kyocera Sprint DuraCore User Manual

Sprint Direct Connect 37
 Wait for ―Push to Talk‖ to appear onscreen.
 Press and hold the DC button.
 Wait for a tone to sound and ―Me‖ to appear onscreen before you begin talking.
4. Release the DC button to listen.
5. Press to end the call.
Note: All Direct Connect calls end automatically if there is no activity on the call for several
seconds.
Tip: To display your Direct Connect number, press > Settings > Phone Info >
Phone#/User ID.
Make a Direct Connect Call From Contacts
1. In standby mode, press CONTACTS (right softkey).
2. Highlight an entry and press and release the DC button.
3. Continue the Direct Connect call as described previously.
Make a Direct Connect Call From History
1. Press > History.
– or –
From standby mode, press the DC button to display your Direct Connect (including Call
Alert) call history only.
 The following icons indicate the types of Direct Connect history entries.

Kyocera Sprint DuraCore Specifications

General

Brand	Kyocera
Model	Sprint DuraCore
Category	Cell Phone
Language	English