Kyocera TASKalfa 220 - MP Tray Size and Media Type; Selecting a Size from Regular Sizes; Selecting a Size from Other Regular Sizes

Preparations
2-8
MP Tray Size and Media Type
Adjust the paper in the MP Tray, register the paper size using the Operation Panel and specify the
media type.
Selecting a Size from Regular Sizes
1
Press the Paper Selection key for 3 seconds.
2
The System Menu will be displayed.
Press or repeatedly until 23.MPTray Config
appears, and press
the OK key.
In the case of the selection of Other Standards or Custom Size,
proceed to Inputting Other Standards on page 2-9 or Entering
Custom Size on page 2-9.
Important! Use the illustration as a reference when setting the
paper in the ## R in the MP Tray.
3
Press or to select the paper size, and press the OK key.
4
Press or to select the media type, and press the OK key.
The display will blink and the copier will return to the System menu.
5
Press or to select 00.Setting done, and press the OK key.
The display will blink and copying starts.
Selecting a Size from Other Regular Sizes
1
Select the Other Standards. (Refer to Selecting a Size from Regular Sizes on page 2-7.), and press
the OK key
.
2
Press or select the paper size, and press the OK key.
The paper size displayed are as shown below.
Inch specifications:
A3 R, A4 R, A4, A5 R, A6 R, B4 R, B5 R, B5, B6 R, Folio R, Oficio 2, Executive, ISO B5, Envelope
#10, Envelope #9, Monarch, Envelope #6.75, Envelope C5, Envelope C4, Envelope DL, Hagaki,
OufukuHagaki, Youkei 2gou, Youkei 4gou, 8k R, 16k R, 16k
Metric specifications:
A6 R, B5, B6 R, Ledger R, Legal R, Letter R, Letter, Statement R, Oficio 2, Executive, ISO B5,
Envelope #10, Envelope #9, Monarch, Envelope #6.75, Envelope C5, Envelope C4, Envelope DL,
Hagaki, OufukuHagaki, Youkei 2gou, Youkei 4gou, 8k R, 16k R, 16k
3
Proceed to Step 4 of Selecting a Size from Regular Sizes on page 2-7.
System Menu:
23.MPTray Config