Copying Functions
OPERATION GUIDE 4-5
4
Zoom Copying
Adjust the magnification to reduce or enlarge the original image. The following zoom options are available.
NOTE: When magnification ratio is larger than 201%, the images will be rotated 90° counter-clockwise prior to
copying.
Auto Zoom
Automatically reduces or enlarges the original image
suitably to the selected paper size.
IMPORTANT: When this is to be used as the default
Mode, set the Auto Sizing on page 5-15 to on.
1 Place the originals on the platen.
The original's size will be automatically detected.
2 Press the Auto%/100% key to light up the Auto%
indicator.
3 Press the Paper Selection key to select the copy
paper.
The magnification is displayed on the message
display.
4 Press the Start key to start copying.
Manual Zoom
Manually reduces or enlarges the original image in 1%
increments between 25% and 400%.
IMPORTANT: When the zoom ratio is changed in the
Auto Paper Select Mode, the zoom ratio for the selected
paper size is also changed to match the zoom ratio.
1 Place the originals on the platen.
2 Press , , or the OK key.
The copy magnification will be displayed in the No.
of Copies display and "%" will light up.
To Next Page
Loading...
Need help?
General
