Kyocera TASKalfa 2200 - Pause and Resumption of Jobs

6-7
Checking the Status > Pause and Resumption of Jobs
Pause and Resumption of Jobs
Pause/resume all printing jobs in printing/waiting.
1
Display the screen.
1 Press the [Status/System Menu/Counter] key.
2 Press the [▲] or [▼] key to select [Status], and press the [OK] key.
3 Press the [▲] or [▼] key to select [Print Job Status], and press the [OK] key.
2
Select [Pause print jobs].
Press the [▲] or [▼] key to select [Pause print jobs], and press the [OK] key. Printing is
paused.
When resuming the printing of jobs that have been paused, press the [▲] or [▼] key to select
[Resume print jobs], and press the [OK] key.
NOTE
If the [Back] key or other function key, such as the [Copy] key, is pressed during Pause,
[Resume paused job] appears. If [Yes] is selected and then the [OK] key is pressed, the job
is resumed and the following screen appears. If [No] is selected and then the [OK] key is
pressed, the following screen appears while the job is paused.
Status/Sys. Menu
Status
21
Status
Print Job Status
21
Print Job Status
Pause print jobs
21