Kyocera TASKalfa 2200 - Express Install

2-12
Installing and Setting up the Machine > Installing Software
Express Install
1
Install using [Express Install].
2
Finish the installation.
If a system restart message appears, restart the computer by following the screen prompts.
This completes the printer driver installation procedure.
If you are installing the TWAIN driver or WIA driver, continue by configuring the Quick Scan/
TWAIN Settings on page 7-23 or Setting WIA Driver on page 2-19.
NOTE
• The machine cannot be detected unless it is on. If the computer fails to detect the
machine, verify that it is connected to the computer via a USB cable and that it is turned
on and click (Reload).
• If the Windows security window appears, click [Install this driver software anyway].
NOTE
Configure the settings for options installed on the machine. Device settings can be
configured after the installation is completed. For details, refer to the Device Settings in the
Printer Driver User Guide on the Product Library disc.
1
2
3
4
Packages include the following software:
• Driver Package
GX DRIVER, Kyocera TWAIN Driver
GX, Kyocera WIA Driver, KYOCERA
Client Tool