Kyocera TASKalfa 2200 - Default Settings on the Machine (System Menu)

7-2
System Menu and KYOCERA Client Tool > Default Settings on the Machine (System Menu)
Default Settings on the Machine (System
Menu)
Configure settings related to overall machine operation.
Press the [Status/System Menu/Counter] key to show the settings on the message display. Then, select from the
settings displayed.
Refer to System Menu Settings
on the following page and configure as needed.
Operation Method (page 3-3).
NOTE
• If the login user name entry screen appears during operations, log in by referring to Administrator User Name and
Password on page 2-20.
The factory default login user name and login password are set as shown below.
• If settings are changed, the changes are immediately reflected when the [Reset] key is pressed.
2
Selects the item displayed or changes the
numeric value.
1
Confirms the selected setting.Cancels the current menu setting to
return to the menu one level higher.
Login User Name Login Password
Admin
*1
*1 Upper case and lower case letters are distinguished (case sensitive).
Admin
*1