Kyocera TASKalfa 2200 - Page 139

7-13
System Menu and KYOCERA Client Tool > Default Settings on the Machine (System Menu)
Function Default
Set the defaults for the following functions.
Common Settings Function Default
Item Description
Function
Default
Original Image Set the default original document type.
Value: Text+Photo, Photo, Text
Zoom Select the enlarged/reduced default when paper size/sending size changed after the
originals set.
Value: 100%, Auto
Collate/Offset Set the defaults for Collate/Offset.
Value
Off, Collate Only, Offset Each Page, Offset Each Set
Orig. Orientation Set the original orientation defaults.
Value: Top Edge on Top, Top Edge on Left
Border Erase Set the default width to be erased as a border.
Value
Metric: 0 to 50 mm (in 1 mm increments)
Inch: 0 to 2" (in 0.01" increments)
NOTE
To specify border erase widths around original, set the value in [Border]. To specify
border erase widths in the middle of original, set the value in [Gutter].
Margin Set the default margin.
Value
Metric
Left/Right: -18 to 18 mm (in 1 mm increments)
Top/Bottom: -18 to 18 mm (in 1 mm increments)
Inch
Left/Right: -0.75 to 0.75" (in 0.01" increments)
Top/Bottom: -0.75 to 0.75" (in 0.01" increments)
Backgrnd Density Set the default Background Density (Copy).
Value: Off, On
EcoPrint Select the EcoPrint default.
Value: Off, On
Auto Rotation Select the default Auto Rotation setting.
Value: Off, On
File Name Entry Set an automatically entered name (default) for jobs. Additional information such as Job
No. can also be set.
Value
File Name Entry: Up to 32 characters can be entered.
Additional Info: None, Job No.
Continuous Scan Set the continuous scan defaults.
Value: Off, On