2-21
Installing and Setting up the Machine > Administrator User Name and Password
3 Press the [▲] or [▼] key to select [Admin. Setting], and press the [OK] key.
2
Configure the settings.
1 Press the [OK] key.
2 Enter a new login user name using the numeric keys and press the [OK] key.
3 Enter a new login password using the numeric keys and press the [OK] key.
4 Reenter the same login password for confirmation and press the [OK] key.
5 Press the [▲] or [▼] key to select [Yes], and press the [OK] key.
The login user name and login password for the administrator are changed.
If the login user name entry screen appears during operations, log in by referring to
Administrator User Name and Password
on page 2-20.
The factory default login user name and login password are set as shown below.
Character Entry Method (page 10-4)
Login User Name Login Password
Admin
*1
*1 Upper case and lower case letters are distinguished (case sensitive).
Admin
*1
To Next Page
Loading...
