Kyocera TASKalfa 2200 - Page 68

3-16
Preparation before Use > Loading Paper
4 Press the [▲] or [▼] key to select [MP Tray Set.], and press the [OK] key.
2
Specify the paper size.
1 Press the [▲] or [▼] key to select [MP Tray Size], and press the [OK] key.
• To select the paper size, press the [▲] or [▼] key to select [Standard Size], and press the
[OK] key.
Press the [▲] or [▼] key to select the paper size, and press the [OK] key.
• To enter a size not displayed in the standard sizes, press the [▲] or [▼] key to select [Size
Entry], and press the [OK] key.
Use the numeric keys or press the [▲] or [▼] key to enter the paper length, and press the [OK] key.
Use the numeric keys or press the [▲] or [▼] key to enter the paper width, and press the [OK] key.
2 Press the [Back] key.
3
Specify the media type.
1 Press the [▲] or [▼] key to select [MP Tray Type], and press the [OK] key.
Orig./Paper Set.
MP Tray Set.
21
MP Tray Set.
MP Tray Size
21
MP Tray Size
Standard Size
*
21
Standard Size
A4
*
21
MP Tray Size
Size Entry
21
Size Entry(Y)
(98 - 297)
297 mm
2
1
Size Entry(X)
(148 - 432)
432 mm
2
1
MP Tray Set.
MP Tray Type
21