Kyocera TASKalfa 250ci - Install Other Optional Devices; Release the Scanner Lever Holding the Mirror 1 and 2 Frames; Installing the Original Platen or DP (Option)

2JZ/2JX/2JV/2H7
1-2-10
1. Turn the scanner lever of the machine rear
side with the tool to release the lever holding
the mirror 1 and 2 frames.
Figure 1-2-14
1. Install optional original platen or DP.
1. Install the optional devices (job separator,
document finisher and/or fax kit etc.) as nec-
essary.
Release the scanner lever holding the mirror 1 and 2 frames.
Scanner lever
(Release position)
Installing the original platen or DP (option).
Install other optional devices.