2JZ/2JX/2JV/2H7-1
1-3-18
U000
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U001
Exiting the maintenance mode
Description
Exits the maintenance mode and returns to the normal copy mode.
Purpose
To exit the maintenance mode.
Method
Press the start key. The normal copy mode is entered.
Maintenance
item No.
Description
No. Description Supplement
(45) Temperature (machine inside)
(46) Temperature (machine outside)
(47) Relative temperature (machineoutside)
(48) Absolute temperature (machineout-
side)
(49) Fixed assets number
(50) Media type attributes
1 to 28 (Not used: 18, 19, 20)
Weight settings
0: Light/1: Normal 1 / 2: Normal 2 / 3: Normal 3/
4: Heavy 1 / 5: Heavy 2 / 6: Heavy 3 / 7: Extra Heavy
Fuser settings
0: High / 1: Middle / 2: Low / 3: Vellum
Duplex settings
0: Disable / 1: Enable
(51) Calibration information
(52) Calibration information
(53) Calibration information
(54) Calibration information
(55) Calibration information
(56) Calibration information
(57) Calibration information
(58) Calibration information
(59) Calibration information
(60) Calibration information
(61) RFID information
(62) RFID reader/writer version information
(63) Color table version
(64) Maintenance information
(65) Drum serial number Black/Cyan/Magenta/Yellow
To Next Page
Loading...
