Kyocera TASKalfa 307ci - Page 297

8-30
Setup and Registration (System Menu) > System Menu
Item Description
IPv6 Settings Set up TCP/IP (IPv6) to connect to the network. This setting is available when [TCP/IP] is [On].
IPv6 Select whether to use IPv6.
Value: Off, On
NOTE
Selecting [On] displays IP address in [IP Address (Link Local)/Prefix Length] after restarting
the network.
Manual Setting Manually specify the IP address, prefix length, and gateway address of TCP/IP (IPv6).
Value
IP Address (Manual): 128-bits address is expressed in eight groups consisting of four-
digit hexadecimal digits. The groups are separated by colon (:).
Prefix Length: 0 to 128
Default Gateway: 128-bits address is expressed in eight groups consisting of four-digit
hexadecimal digits. The groups are separated by colon (:).
NOTE
This function is displayed when [IPv6] is set to [On].
To enter [Default Gateway], set [RA (Stateless)] to [Off].
RA (Stateless) Select whether to use RA (Stateless).
Value: Off, On
NOTE
This function is displayed when [IPv6] is set to [On].
Selecting [On] displays IP address in [IP Address (Stateless)/Prefix Length] after restarting
the network.
DHCP Select whether to use the DHCP (IPv6) server.
Value: Off, On
NOTE
This function is displayed when [IPv6] is set to [On].
Selecting [On] displays IP address in [IP Address (Stateful)/Prefix Length] after restarting the
network.
Bonjour Select whether or not to use Bonjour.
Value: Off, On
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.