Kyocera TASKalfa 307ci - Page 309

8-42
Setup and Registration (System Menu) > System Menu
Item Description
Sleep Rules (models for
Europe)
Select whether to use the Sleep mode for the following functions individually:
• Card Reader
*1
• RAM Disk
•Application
Value: Off, On
NOTE
This function will not be displayed when the optional network interface kit is installed.
If the sleep condition is not turned off, the ID card cannot be recognized.
Sleep Level (models except for
Europe)
Select the sleep level.
Set the Energy Saver mode to reduce power consumption even more than Quick Recovery
mode.
Value: Quick Recovery, Energy Saver
NOTE
This function will not be displayed when the optional network interface kit is installed.
Energy Saver Select whether to use the Energy Saver mode for the following functions individually:
• Card Reader
*1
• RAM Disk
•Application
Value: Off, On
NOTE
When the machine has entered sleep mode with Energy Saver setting, the ID card cannot be
recognized.
Sleep Timer Set amount of time before entering Sleep.
Value
For Europe: 1 to 60 minutes (1 minute increments)
Except for Europe: 1 to 240 minutes (1 minute increments)
Auto Error Clear If an error occurs during processing, processing stops to wait for the next step to be taken by
the user. In the Auto Error Clear mode, automatically clear the error after a set amount of time
elapses.
Value: Off, On
Error Clear Timer If you select [On] for Auto Error Clear, set the amount of time to wait before automatically
clearing errors.
Value: 5 to 495 seconds (in 5 second increments)
NOTE
This function is displayed when [Auto Error Clear] is set to [On].
Interrupt Clear Timer Set the period after which the machine reverts to Normal mode when it has been set to
Interrupt Copy mode and then left unused.
Value: 5 to 495 seconds (in 5 second increments)
Unusable Time
*2
FAX System 11 Operation Guide.
Ping Timeout Set the time until timeout occurs when [Ping] is executed in "System/Network".
Value: 1 to 30 seconds (in 1 second increments)
*1 Displayed when the optional Card Authentication Kit is activated.
*2 Displayed only when the optional FAX Kit is installed.