TASKalfa 3500i, TASKalfa 4500i, TASKalfa 5500i
Data Security Kit (E) Overseas Version Security Target
© 2011 KYOCERA MITA Corporation
23
8. ACRONYMS AND TERMINOLOGY
8.1. Definitions of terms
The definitions of the terms used in this ST are indicated in Table 8.1.
Table 8.1 Definitions of terms used in this ST
Terms Definitions
Image Data It indicates the image information that is processed
inside the MFP when TOE users use copy function,
network scan function, print function and document
management box function.
Temporary Storage Keeping the received image data temporarily on the HDD
without outputting it or forwarding it as is, or keeping the
image data temporarily on the HDD during the image
processing. This is executed automatically during the
process of the MFP without the users being conscious
about it. This should be compared to long period
storage.
Long Period Storage
Keeping the image data on the HDD. The users will
have to consciously conduct the storage operation for
this storage. This should be compared to temporary
storage.
Client PC It indicates the computers that connect to the network,
and utilize the TOE services (functions) of the TOEs that
are connected to the network.
Network Scan A function to transmit the scanned image data or the
stored image data in the document management box, to
the client PCs. There is PC transmission that transmits
them via the LAN, e-mail transmission that transmits
them via e-mails, and a TWAIN function that captures
images of the originals by operations from the client PC.
Management area An area within the image data where management
information for that data is recorded. A logical deletion
of image data means making this area unrecognizable.
Actual Data Area An area within the image data where data composing the
actual image is recorded. When image data is logically
deleted, this area will remain. This remaining area will
be called “residue area”.
To Next Page
Loading...
