8 WHEN SOMETHING IS WRONG WITH THE EQUIPMENT
110 Regular Maintenance
Regular Maintenance
We recommend that you clean the following portions weekly so that the originals can always be scanned in unsoiled
conditions.
y Be careful not to scratch the portions when cleaning them.
y Do not use such solvents as thinner or benzine when cleaning the surface of the equipment.
- This could warp the shape of the surface or leave it discolored.
- When using a chemical cleaning pad to clean it, follow the instruction.
1. Scanning area (surface of the long rectangular glass)
Wipe it with the accessory cloth or a soft dry cloth. If there are still stains remaining, wipe clean with a piece of soft
cloth which has been moistened with water and then squeezed well. Do not use solvents such as alcohol.
2. Original glass
3. Guide
4. Platen sheet
Clean the surface as follows depending on the extent of the staining.
- Clean it with a soft cloth.
- Clean it with a soft cloth lightly moistened with water.
- Clean it with a soft cloth lightly moistened with alcohol, and then wipe with a dry cloth.
- Clean it with a soft cloth lightly moistened with watered-down neutral detergent, wipe with a cloth moistened with
water, and then wipe with a dry cloth.
3
4
1
2
To Next Page
Loading...
