1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Jam 25
1 TROUBLESHOOTING FOR THE HARDWARE
8
Close the upper receiving tray of the Finisher.
Place your hands on the near and far side of the lever and push to
close the tray until it clicks.
Be careful not to let your fingers be caught between the
Finisher body and the upper receiving tray.
You can close it by pressing the right side of the lever with your
hand.
9
Lower the shutter of the paper exit portion to open it.
10
Remove the paper.
11
Close the front cover first, and connect the Finisher
to the equipment.
Move the Finisher slowly placing your hands on the positions
shown in the figure.
Be careful not to let your fingers be caught between the
Finisher and the equipment.
To Next Page
Loading...
