KYORITSU 6050 - Servicing; Case and Strap Assembly

― 29 ―
11.SERVICING
Ifthistestershouldfailtooperatecorrectly,returnittoyourdistributor
statingtheexactnature of the fault.Beforereturningtheinstrument
ensurethat:-
1.Thebatteriesareingoodcondition.
Pleaseremembertogiveall the information possible concerning the
natureofthefault,asthiswillmeanthattheinstrumentwillbeserviced
andreturnedtoyoumorequickly.
12.CASEANDSTRAPASSEMBLY
CorrectassemblyisshowninFig20,21.Byhangingtheinstrument
roundtheneck,bothhandswillbeleftfreefortesting.
Fig.20 Fig.21
Passthestrapbeltdownthrough
the side panel of the main body
fromthetop,andupthroughthe
slotsoftheprobe case from the
bottom.
Passthestrapthroughthebuckle,
adjustthestrapforlengthand
secure.