Vehicle Super Probe
- 3 -
2. Product Introduction
KM50 Can:
1. Diagnose 12 ~24V automotive electrical systems swiftly and accurately.
2. Show battery voltage reading and help user determine circuit polarity immediately
after connecting the KM50 clips to the vehicle battery.
3. Test DC Voltage, AC Voltage, Frequency, Duty Cycle, Fuel Injection Circuit,
Resistance, and Diode. Especially, in AC Voltage, Frequency, Duty Cycle and
Fuel Inject Modes, user can long press the mode button for 3 seconds to switch
between Waveform Display Mode and Digital Display Mode.
4. Activate electrical components and test their functions without jumper leads – by
depressing the rocker switch to conduct a positive or negative battery current to
the tip so as to power up electrical components.
5. Test bad ground contacts instantly without performing voltage drop tests.
6. Help user to follow and locate short circuits without using external fuses.
7. Test continuity with the assistance of its auxiliary ground lead.
8. The tool is short-circuit protected. If it becomes overloaded, Its internal circuit
breaker will trip to protect the instrument from overload.
9. When the circuit breaker is tripped, the tool will NOT be able to conduct battery
current to the tip even when the rocker switch is pressed; however, all other
functions of the tool are still active, which means you can still probe a circuit and
observe the voltage reading.
To Next Page
Loading...