Vehicle Super Probe
- 7 -
IMPORTANT:
When powering-up components, you can increase the life of rocker
switch in the tool if you first press the switch, and then contact the tip to the
component. The arcing will take place at the tip instead of the metal contacts of the
rocker switch.
5.1 DC Voltage
Figure 3
1)
Clip the red alligator clip to battery positive pole; clip the black alligator clip to
battery negative pole.
2)
Contact the probe tip to the circuit.
3) The LCD display will show the battery voltage and the real-time voltage,
maximum and minimum values at the probe (Figure 3). The battery voltage
reading will not be affected and its accuracy can be assured by the application of
Kelvin test method, which avoids voltage drop usually caused by excessive length
of instrument power cable.
To Next Page
Loading...
