Rigging system description
K3-TILT
K3-TILT is a site angle adjustment accessory that interfaces between KS28 and K3 in a stacked array. It is used in
combination with two KS28-OUTRIG to ensure stability.
Do not use K3-TILT in a own array.
The opening angle of K3-TILT can be adjusted between 0 and -20°.
K3-TILT features two shackles to implement an additional safety.
KS28-OUTRIG
KS28-OUTRIG is a set of two stability bars for KS28. KS28-OUTRIG matches the rigging system of KS28.
30 K3 owner's manual (EN) version 1.0
To Next Page
Loading...
