37
The last customisable parameter, nally, is:
•
Selector activation with “SLIDE” (>>>)
This function allows to activate the selector, when it is in screen saver mode, by just swiping with a
nger from left to right in the bottom section of the digital selector, near the A-SET-B buttons. Although
not an actual password (which anyway can be set as described in the paragraph “USER PASSWORD
MANAGEMENT”), it still allows to ensure that the operating program adjustment menu can only be
accessed if one is aware of this option.
Warning!
The operating programs whose state is OFF shall no longer be displayed, but the selection
will switch to the rst available program whose state is ON; accordingly, the A( ) and C(F2)
buttons shall have no eect if their state is set to OFF.
After setting the customisation options, press the SET button to return to the main page of the technical
area.
To exit the technical area and return to the main screen, press SET again.
4-LANGUAGE
This menu allows to select the language for the operating program
description.
Scroll the available languages using the A (down) or C (up) buttons until
you nd the desired one. Then press the SET button to conrm and exit
this menu.
To Next Page
Loading...
Need help?
General
