Label ETERNA 90 EASY User Manual

TECHNICAL AREA
By means the T-EASY you can set the selector option and language.
Hold the SET button pressed for about 2 seconds to enter the technical area.
The following are the 2 menus available in the technical area:
3 -- SELECTOR OPTION
4 -- LANGUAGE
To switch from the menù 3 to menù 4 press the B button;
to enter the menù press the A button.
36
3-SE
LECTOR OPTION
This menu allows to customise the
T-
EASY
selector.
As mentioned in the “DAY
-TO-DA
Y USE” paragraph, it allows to select 6 different operating
programs,
to enable
a reduced
opening
during
winter and to activate a set of special functions
through the C
button. In a simple installation, these choices
are often unnecessary and
could
confuse
the end user.
For this reason
the undesired operating programs
and the buttons
associated with special functions can be filtered out on the selector.
When the menu is accessed, the first customisable parameter is displayed:
The AUTO operating program
The current state of this parameter is displayed in the right section of the alphanumeric character line:
ON = enabled
OFF= disabled
To change the parameter state, press the B button to disable it (OFF) or the D button to enable it (ON).
To move to the next customisable parameter, press the A button; to return to the previous
customisable parameter, press the B button.
The customisable parameter sequence is the following:
•
AUTO operating program
•
EXIT operating program
•
ENTER operating program
•
OPEN operating program
•
LOCK operating program
•
OFF operating program
•
A function button (winter reduced opening)
•
C function button (F2 special functions)

Label ETERNA 90 EASY Specifications

General

Brand	Label
Model	ETERNA 90 EASY
Category	Door Opening System
Language	English