LaCie Network Space 2 - Understanding and Accessing Shares

LaCie Network Space 2 • DESIGN BY NEIL POULTON Accessing & Transferring Files
User Manual page 18
3.1. About Shares
The LaCie Network Space 2 has three shares (similar to drive
partitions or volumes) by default: OpenShare, MyShare, and
USBShare (USBShare will be created automatically when you allocate
space for USB access; see 4.9.2. Modifying USBShare Capacity).
The following table sums up the differences between them:
Share Created Accessibility Connection
MyShare By default Password-protected, accessible only to
admin by default
When connected to the network
(Ethernet)
OpenShare By default Public, accessible to any user on the
network
When connected to the network
(Ethernet) and to UPnP/DLNA-certified
players/adapters (if UPnP service is
activated)
USBShare When capacity is allocated to
USBShare
Public, accessible to any user on the
network
When connected to the network
(Ethernet) or to a computer (USB)
[UserShare]
(ex. JohnShare)
When the administrator adds
a new user
Password-protected, accessible only to
the user
When connected to the network
(Ethernet)