Preamble
1. PREAMBLE
A. PRECAUTIONS
Before handling the product or its accessories, the use of the PPE mentioned below is mandatory:
Before using the device, please read this operating manual fully and keep it for future use.
B. MAKING THE LIGHTS OPERATIONAL:
Millenium and Smart Millenium traffic lights are all IDENTICAL and INDEPENDENT; there are no master or slave lights.
Power up each light by connecting them to a 12 V battery or two 6 V batteries in series observing the correct polarity or
on 230 V (contact your dealer). To switch on the remote control, press one of its buttons.
The lights are switched on, paired and programmed from the remote control.
C. BATTERY COMPATIBILITY AND BATTERY LIFE:
* Varies according the cycle used, the ambient light, humidity, temperature and the programming mode used. As measurement technology
and instruments are constantly evolving, this information is provided for general reference only.
If the battery level is low, alerts are reported to the remote control allowing the user to replace it before the lights go out
(Battery < 24 hrs / Battery < 12 hrs / Battery 1 hr).
When there is less than 24 hours’ battery life, the traffic lights automatically switch to STANDARD mode.
If the battery life is less than or equal to 1 hour, the traffic lights switch to autonomy mode, equating to the lights going out,
the programming is then retained for 20 minutes, allowing the lights to quickly be returned to operational status after the
battery is changed. Beyond this 20-minute period, the pairing is retained, and the lights need to be programmed.
To Next Page
Loading...