3. PREPARATION FOR DEPLOYMENT
A. UNFOLDING THE LIGHT-HEAD:
B. FOLDING THE LIGHT-HEAD:
C. DEPLOYMENT OF TELESCOPIC EXTENSIONS:
1) Loosen the handle half a turn
2) Pull to release the locking bolt
3) Fold or unfold the extension
4) Tighten the handle
Perform this step on both handles
D. LOCKING/UNLOCKING THE HEAD FOLDING SYSTEM:
Once the extensions have been deployed, lock the tightening lever to ensure optimum stability for the light-head and
extensions.
Note: before folding the light-head over the box, ensure that the tightening lever is in the unlocked position.
To Next Page
Loading...