LACROIX City MILLENIUM - Moving the Light; Initial Activation of Lights

USER MANUAL
7
FR
4. MOVING THE LIGHT
Wheelbarrow Mode
Trolley Mode
5. INITIAL ACTIVATION OF LIGHTS
The activation procedure allows users to select a country and the language for using Millenium traffic lights.
As activation is stored in the remote control’s memory, this step is only required for first use or after a system reset.
A
QUICK START
OK
QUICK START
SELECT COUNTRY
FRANCE
SELECT LANGUAGE
FRENCH
FINISHED
OK
OK
Position the remote control opposite the
infrared signal window located on the
back of the light-head.
Select the QUICK START menu from the
remote control.
As the choice of country affects the
programming mode of your traffic lights,
please ensure you comply with the
country where it is used.
DUE TO SPECIFIC LOCAL REGULATORY REQUIREMENTS, THE SELECTED COUNTRY MUST BE IDENTICAL TO
THE COUNTRY WHERE THE PTLs ARE USED.