18
5 Operating Control and Displays
NOTICE!
Information concerning fault and diagnostic codes you may find in the list of fault codes.
For fault analysis a fault code and diagnostic code D1 or D2 is required.
5.4.3 Software Version
Display software version
1. Use cursor keys to select menu and press ENTER to confirm.
The display shows the "Software version" menu.
Fig. 5-8 Fault history menu
1 Error code-display pictogram
2 Fault code (Last 10 faults are stored,
no. 01 is the latest fault)
3 Diagnostic code 1
4 Diagnostic code 2
5 No. of operating hours when fault has oc-
cured
Fig. 5-9 Software version menu
1 Software version pictogram
2 UI300 software version (User Interface)
3 BT300 software version (BurnerTronic)
To Next Page
Loading...
