4
1 General Information
1 General Information
1.1 Validity of these Instructions
Content of this Operating Manual
This Operating Manual describes the Lambda Transmitter LT2 with all components necessary
for O
2
measurement, such as the Lambda Probe LS2, the probe installation fitting, etc.
Accessories and special applications
Information on accessories and special applications is provided in the booklets supplied with
the particular systems. This information can be obtained from the manufacturers, at the Wall-
dorf address.
This Operating Manual explains the functioning, mounting, installation, maintenance and op-
eration of the Lambda Transmitter LT2. Other booklets, such as Product Information for exam-
ple, provide further information but must never be used as a substitute for this Operating
Manual.
CAUTION!
Always read the Operating Manual before starting work!
Please adhere strictly to all warnings/safety instructions!
For particular tasks, for example electrical installation, specialised knowledge is required.
These tasks may only be carried out by suitably qualified personnel. See chapter 2.3 Permis-
sible Users.
Validity
Our products undergo constant redevelopment. However, we make every effort to ensure that
the Operating Manual is accurate and relevant to individual applications.
All previous editions are rendered obsolete on publication of an updated and corrected new
edition.
On the last page you will find the current version number of this Operating Manual and the
corresponding order number.
To Next Page
Loading...
