LANCOM GS-1224
쮿 Chapter 4: Operation of Web- based Management
41
EN
왏 Force Authorized:
The controlled port is forced to hold in the authorized state, no mat-
ter which EAP negotiation between authenticator and supplicant
takes place.
왏 Auto:
If the port is set to be in authorized or unauthorized state depends on
the result of the authentication exchange between the authenticatior
and supplicant.
Default: Force Authorized
쮿 Port State:
Shows the port status of authorization.
쮿 Re-authenticate:
Using this function all devices connected to this port will have to re-
authenticate with username and password when the reauthentication
period expires.
쮿 Re-authenticate All:
Re-authenticate for all ports at once.
Using this function the devices connected to all ports will have to re-
authenticate with username and password when the reauthentication
period expires.
쮿 Force Reinitialize:
Using this function all devices connected to this port will have to re-
authenticate with username and password immediately.
쮿 Force Reinitialize All:
Using this function the devices connected to all ports will have to re-
authenticate with username and password immediately.
To Next Page
Loading...
