9: Terminal and Host Settings
EDS1100/2100 Device Server User Guide 69
Figure 9-5 Host Configuration
3. Enter or modify the following settings:
Table 9-6 Host Configuration
4. Click Submit to save changes.
5. Repeat above steps as desired, according to additional host(s) available on your product.
Host Settings Description
Name Enter a name for the host. This name appears on the Login Connect Menu. To
leave a host out of the menu, leave this field blank.
Protocol Select the protocol to use to connect to the host. Choices are:
Telnet
SSH
Note: SSH keys must be loaded or created on the SSH page for the SSH
protocol to work.
SSH Username Appears if you selected SSH as the protocol. Enter a username to select a pre-
configured Username/Password/Key (configured on the SSH: Client Users
page), or leave it blank to be prompted for a username and password at
connect time.
Remote Address Enter an IP address for the host to which the device will connect.
Remote Port Enter the port on the host to which the device will connect.
To Next Page
Loading...
Need help?
General