8: Line and Tunnel Settings
EDS1100/2100 Device Server User Guide 49
Tunnel – Connect Mode
Tunnel – Disconnect Mode
Tunnel – Modem Emulation
The following sections describe the steps to view and configure specific tunnel number settings.
These instructions also apply to additional tunnel menu options.
Tunnel – Statistics
The EDS1100/2100 logs statistics for tunneling. The Dropped statistic shows connections ended
by the remote location. The Disconnects statistic shows connections ended by the EDS1100/
2100 unit.
To display statistics for a specific tunnel:
1. Select Tunnel on the menu bar. The Tunnel web page appears.
2. Select a tunnel number at the top of the page.
3. Select Statistics. The Tunnel Statistics page for the specific tunnel appears.
If a particular tunnel is connected, the following becomes available:
Identifying information about the tunnel connection (i.e., “Connect 1 Counters”)
Address of connection (i.e., “local:10001 -> 172.22.22.22.10001”)
Kill Connection(s) link: Click this link to terminate this active tunnel connection, as
desired.
Octets forwarded from Serial
Octets forwarded form Network
Uptime
4. Repeat above steps as desired, according to additional tunnel(s) available on your product.
To Next Page
Loading...
Need help?
General