Need help?Do you have a question about the Lars Thrane Iridium Certus LT-4100 and is the answer not in the manual?
General| Brand | Lars Thrane |
|---|---|
| Model | Iridium Certus LT-4100 |
| Category | Conference System |
| Language | English |
States Lars Thrane A/S's limited liability for manual use and information accuracy.
Instructions for proper disposal of old electrical and electronic equipment.
Clarifies the equipment's relation to IMO and SOLAS regulations.
Explains meanings of WARNING, IMPORTANT, and NOTE texts in the manual.
Essential safety precautions for installation, operation, and service phases.
Details FCC and Industry Canada compliance requirements.
Provides context on the manual's purpose and intended audience.
Specifies the software versions the manual applies to.
Tracks changes and updates to the manual.
General introduction to the LT-4100 Satellite Communications System.
Outlines the system's intended use and operational constraints.
Provides a general description of the LT-4100 system and its components.
Procedures for unpacking and inspecting system components.
Lists available mounts, cables, and connectors.
Details the control unit, its interfaces, and mounting.
Describes the handset and its associated cradle.
Details the antenna unit, its mounting, and considerations.
Guides on installing the LT-4110 Control Unit indoors.
Covers outdoor mounting considerations for the antenna unit.
Instructions for mounting the antenna unit on poles.
Describes physical interfaces on the control unit.
Details the insertion and use of the Certus SIM card.
Explains the AUX connector for I/O and RS-422 serial communication.
Covers system Bluetooth capabilities and pairing.
Specifies requirements for coaxial cables connecting units.
Details the system's power usage under different conditions.
Explains proper DC isolation and chassis grounding procedures.
Recommends using approved galvanic isolated power supplies.
Describes the control unit's display, buttons, and functions.
Guides users through the system's menu structure.
Explains icons and information displayed in the status bar.
Steps required to activate the LT-4100 system.
Details voice call features, lines, and call history.
Explains IP data activation, firewalls, and port forwarding.
Describes prepaid/postpaid voice, PIN lock, and call barring.
Steps to access the system's web interface.
Configures DHCP client, server, or static IP settings.
Configures telephony, IP data activation, and external I/O.
Details enabling remote access and authentication.
Explains the BAM system for alerts and their management.
How to download and send diagnostic reports for troubleshooting.
Procedures for contacting support for service or repair issues.
Lists relevant IEC standards for maritime equipment.
Provides details on GNSS sentences and BAM alert categories.
Technical specifications for system components.
Technical drawings of system components.
To Next Page
