Laser Technology TruPulse 360R User Manual

LTI TruPulse 360R User’s Manual Page 13
Copyright (c) [2017] Laser Technology, Inc. All Rights Reserved. Unauthorized duplication, in whole or in part, is strictly prohibited.
 Measurement Modes
SD
Slope Distance
Straight line distance between the TruPulse 360R and the target.
VD
Vertical Distance
The distance between the target and the perpendicular to the path of
the horizontal distance.
HD
Horizontal
Distance
The level distance between the TruPulse 360R and the plane of the
target.
INC
Inclination
The angle of inclination between the TruPulse 360R at level and
the target.
AZ
Azimuth
The magnetic heading to the target referenced to magnetic North.
Flashing: The TruPulse 360R is in need of a Horizontal Angle
Compass Calibration (page 30). The AZ indicator flashes two times,
stops, and then flashes again. This continues until a successful
calibration is performed. You can still take measurements during this
time.
The TruPulse 360R detects when the battery voltage has dropped, or
battery compartment cover has been removed, and/or if there has been a
significant temperature change that affects the accuracy of the compass.
HT
Height
Three-step Height Routine. The final calculation represents the vertical
distance between the points on the target represented by ANG1 and
ANG2.
ML
Missing Line
Two-step Missing Line Routine finds the connecting vector (or missing
line) between two points. The final calculation shows the SD, VD, HD,
INC, and AZ associated with the missing line.

Laser Technology TruPulse 360R Specifications

General

Brand	Laser Technology
Model	TruPulse 360R
Category	Measuring Instruments
Language	English