10
LSI 090 - Rev. 00 - Ed. 04/2018
Attention!
The appliance must be installed on a at bearing surface, the stability of which needs to be checked.
Attention!
The appliance must be installed where use and maintenance are restricted to trained staff.
The electrical power system, water supply system and drainage system must prearranged by the customer in an ideal posi-
tion to permit the correct installation. The installer cannot modify existing systems that have been arranged by the customer.
Refer to the chapter “Pre-installation arrangements organised by the customer” in the “USER AND MAINTENANCE MANUAL”
attached to each machine.
To Next Page
Loading...
