Operating Procedures
Mule Pulley Adjustment
4
4-8 Lastec//061714 Operating Procedures
4.6 Mule Pulley Adjustment
The mule pulley is located under the
engine. The drive belt passes through
the pulley to the main deck drive pulley.
Under normal operating situations, the
pulley should not be changed from the
factory set position.
However, in order to help the idler pulley
keep proper tension on a drive belt
(40-50 ft-lbs on the Cricket gauge [part
number 028498]) that has possibly
stretched, the mule pulley may be
adjusted. Simply remove the center bolt
and place the pulley at the level most
appropriate to maintain the proper belt
tension.
To Next Page
Loading...
