Setting the Mode
1
Push the FUNCTION button for 3
seconds and position the " " under
the "MODE" mark.
2
In the case of weekly closing, push
the CHANGE button to set the left-
side number at "2" (Biweekly
closing ; set the left-side number at
"3".) and then push the SET button.
At that moment, the flashing of the
display will change to the right-side
number.
Order Option
Monthly
Weekly
Biweekly
Semimonthly
JOB COST
1
2
3
4
5
23
Refer to "WHAT YOU CAN DO WITH THE 7000E" before setting.
You can choose 2 types of mode, PAYROLL and JOB COST.
If error " E-49 " appears when you try to change settings, then you must reset all cards
before proceeding. ( See "All cards reset" )
Payroll Mode
The unit has 4 types of pay period. You can select one of these periods. To set the pay period,
you have to input a starting day of the week or date.
When you want weekly or biweekly closing, you have to set a starting day of the week.
When you want monthly or semimonthly closing, you have to set a starting date.
Example 1
Weekly closing (Biweekly closing) in Payroll Mode ----- the
closing day is Sunday.
Set the "Mode".
SET
SET
Weekly closing
FUNCTION CHANGE
FUNCTION CHANGE
MODE
MODE
Payroll Mode
Job Cost Mode
20
To Next Page
Loading...
