Lathem 7000E - Resetting the Unit; Resetting to Factory Defaults

Resetting
To return all settings to their factory defaults.
Please note that all settings will be deleted and will revert to the factory defaults when
the reset switch is pushed. To make new settings, please refer to "6.SETTING".
Reset switch
(inside the small
round hole)
Push the reset switch with a pointed
implement while pushing the
DATE/TIME and CHANGE button.
At that moment, the display will
change to AC " ".
And after a few seconds, the display
changes to date & time "1 12:00 a.m.".
CHANGE
DATE/ TIME
CHANGE
DATE/ TIME
CHANGE
DATE/ TIME
38
If you want to reset all cards, refer to "All cards resetting" in "4.DAILY OPERATIONS".
AM
1
2
35