Launch TLT245AT / TLT250AT(C) Two-post lift’s Installation manual
31
Appendix：Transportation Guide
z TLT245AT clear-floor two post lifts has 5 pieces of
packaging.: 1# Angle iron bracket packaging. 2#
cardboard box packaging. 3# top beam packaging, 4#
and 5# extension column packaging.
TLT250AT(C)
clear-floor two post lifts has 3 pieces of packaging: 1#
Angle iron bracket packaging. 2# cardboard box
packaging. 3# top beam packaging. The metal
surface of product in package is wrapped with plastic
bubble bag and cardboard. Transportation guide is
printed on packing (See Figures below)
z While using forklift to lift the 1# packaging,
the fork
arms must be of same distance from the center of
the packaging and the distance between two fork
arms should at least be 700mm
.While using a
forklift to pick up goods, the forks should get into the
area below them as deep as possible. The goods
should not be touched by fork tips or pushed by them.
Product damages caused by collision or high piling
should be avoided
Power side column
Offside column
Center
Lifting area
Packaging size：2900×610×720
1＃Angle iron bracket packaging
Weight：515kg
1＃Angle iron bracket packaging（TLT245AT）
bracket packaging
Packaging size：288×610×980
Weight
：810
Offside column
Power side column
1
＃Angle iron bracket packaging
1＃Angle iron bracket packaging（TLT250AT（C））
To Next Page
Loading...
