Launch X-431 ADAS PRO - 5.2.1.2 Placing ADAS Panel Centered

LAUNCH X-431 ADAS PRO Calibration Tool User Manual
43
Or the distance from the center of the front wheel hub of the vehicle to the calibration
panel.
5. Use the adjusting screws of the base support to adjust so that the horizontal and the
vertical level gauge of the calibration frame are centred respectively.
Now the calibration panel is placed correctly in front of the vehicle.
5.2.1.2 Placing the ADAS calibration panel centred in front of the vehicle
In this step, we just need to make sure that the left (CL) and right (CR) scale of the
cross member projected from the wheel clamp laser show the same values.
Fig. 5-4