LAUNCH X-431 PRO3 User Manual
23
5 Diagnosis
5.1 Intelligent Diagnosis
Through simple Bluetooth communication between the X-431 PRO3 handset
and VCI connector, you can easily get the VIN (Vehicle Identification Number)
information of the currently identified vehicle. Once the VIN is successfully
identified, the system will retrieve it from the remote server and then guide you to
vehicle information page without the necessity of step-by-step manual menu
selection.
The vehicle information page lists all historical diagnostic records of the vehicle,
which lets the technician have a total command of the vehicle faults. In addition,
a quick dial to local diagnosis and diagnostic function are also available on this
page for reducing the roundabout time and increasing productivity.
Notes:
• Before using this function, please make sure the VCI connector is properly
connected to the vehicle’s DLC. For detailed connection, see Chapter 4.4.3 “Vehicle
Connection”.
• A stable network connection is required for this function.
Follow the steps below to proceed.
1. Tap “Intelligent Diagnosis” on the Job menu screen to enter Fig. 5-1.
To Next Page
Loading...
Need help?
General
