EasyManuals Logo
Home>Launch>Diagnostic Equipment>X-431 PRO3

Launch X-431 PRO3 User Manual

Launch X-431 PRO3
97 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
LAUNCH X-431 PRO3 User Manual
iv
DLC (Data Link Connector) is clear and secure.
Automotive batteries contain sulfuric acid that is harmful to skin. In operation,
direct contact with the automotive batteries should be avoided. Keep the
ignition sources away from the battery at all times.
Precautions on Operating Vehicle’s ECU
Do not disconnect battery or any wiring cables in the vehicle when the ignition
switch is on, as this could avoid damage to the sensors or the ECU.
Do not place any magnetic objects near the ECU. Disconnect the power
supply to the ECU before performing any welding operations on the vehicle.
Use extreme caution when performing any operations near the ECU or
sensors. Ground yourself when you disassemble PROM, otherwise ECU and
sensors can be damaged by static electricity.
When reconnecting the ECU harness connector, be sure it is attached firmly,
otherwise electronic elements, such as ICs inside the ECU, can be damaged.
www.launch-cis.ru

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Launch X-431 PRO3 and is the answer not in the manual?

Launch X-431 PRO3 Specifications

General IconGeneral
BrandLaunch
ModelX-431 PRO3
CategoryDiagnostic Equipment
LanguageEnglish

Related product manuals