Launch X-431 PRO3 - 6.3 Steering Angle Calibration; 6.4 ABS Bleeding

LAUNCH X-431 PRO3 User Manual
55
Fig. 5-41
1. Slide the switch “Allow device to be connected to the WEB client remote
diagnostic device” to ON so that the partner can find and connect to this
device while using the PC.
2. Notify the partner of the PC client website http://remote.x431.com/cn/. When
the partner accesses the link, the PC displays as below:
*Note: Before processing remote diagnosis, please make sure the X-431 PRO3
handset is properly connected to the vehicle.
www.launch-cis.ru