Launch X-431 PRO3 User Manual

LAUNCH X-431 PRO3 User Manual
78
& [FEED] for 8 seconds, the following resetting command will be printed out:
at + default = 1
ok
at + reboot = 1
rebooting...
1. Tap “Reset” to configure Wi-Fi printer.
Fig. 9-10
Step 1: Connect the printer:
Tap “Scan” to start scanning and select the desired printer hotspot named
with X-431PRINTER-XXXX (XXXX stands for 4 characters), and then tap
“Connect” to enter Step 2.
Step 2: Join the Wi-Fi printer into LAN:
www.launch-cis.ru

Launch X-431 PRO3 Specifications

General

Display	10.1 inch
Connectivity	Wi-Fi, Bluetooth
Camera	Rear 5MP
Supported Protocols	CAN
Diagnostic Functions	Full system diagnostics, coding