LAUNCH X-431 PRO3 User Manual
85
devices automatically.
5. Tap the name of the connector (98********00, where ******** stands for 8 digits)
to start pairing. Input the Bluetooth request code (default value: 0000 or 1234)
if necessary. Once the pairing is properly done, the system will display it as a
paired device.
8. How to set up a network connection?
There are 2 kinds of network connection available on X-431 PRO3.
A. Wired Connection
1. Connect the Ethernet cable to X-431 PRO3 directly.
2. On the home screen, tap
Settings
->
Ethernet
, and slide the switch to On.
B. Connect to a Wi-Fi network
X-431 PRO3 has built-in Wi-Fi that can be used to get online. Once you’re online,
you can register your X-431 PRO3, browse the Internet, get and update apps
and send email on your network.
Note: Once WLAN is set as ON, X-431 PRO3 will consume more power. While
WLAN keeps unused, please turn it off to conserve battery power.
1. On the home screen, tap
Settings
->
Wi-Fi
.
2. Tap or slide the Wi-Fi switch to ON, X-431 PRO3 starts searching all
available wireless LANs.
3. Choose the desired Wi-Fi access point / network,
If the network you chose is open, you can connect directly;
If the selected network is encrypted, you have to enter the right security
key (network password).
9. How to retrieve the login password?
Please follow below steps to proceed in case you forgot the login password:
1. Tap the application icon on the home screen to launch it.
2. Tap [Login] button on the upper right corner of the screen.
To Next Page
Loading...
Need help?
General
